Remedy Your Plumbing Problems With These Great Tips

Posted on

If you’re a home owner unfamiliar with plumbing, you’re probably familiar with the experience of being charged an arm and a leg for what seems like a simple plumbing repair. If you’d like to avoid this experience again, read on for some advice and tips on how to fix your own plumbing. Check out the list we’ve compiled for you below from Floodbrothersplumbing.com.

If you cannot turn off your main water valve before leaving on vacation, turn off the individual valves for the toilets, sinks, and washing machine. If the valves do not look like they are in good working order, then leave them on and that will be something that you need to have changed when you return.

Every so often you should check your toilet for leaks. A good way to check for leaks would be to put food coloring, Kool-Aid, or even coffee in the tank, anything that will color the water will work. You should check your toilet bowl in a little bit, and if there is color in the bowl, your toilet is leaking and the stopper and/or flush valve may need changed.

Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.

If you do attempt to do plumbing repairs yourself, do not forget to wear proper safety gear. Many pipes and plumbing areas are under great pressure and if there is a pipe that bursts, it can cause serious injury. Wear the proper eye, hand, and ear protection when doing any plumbing repairs.

If your water bill seems unusually high and you haven’t changed your water usage, the problem is most likely in the service line. The cost to hire a professional to find and repair the service line most often is far greater than installing a new line and then having the old one shut off permanently.

Try to update your internal toilet components from time to time. If you have to hold down the handle for a long time to flush your toilet, you may need to replace a worn piece. This improvement will help to save a lot of money on your water bill during the year.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

When replacing any PVC type pipes in your home, make sure you buy the correct PVC for the job. PVC comes in several different sizes and grades as well as for different temperature applications. If the water going through the pipes is headed for the kitchen or bathroom, or is for laundry or gardening usage, it must be labeled as “Potable.”

Plumbing isn’t as hard as it can seem, when you have access to good information and advice about how to go about solving your own plumbing problems. Next time you have plumbing problems in your house, try applying the tips from this article and see if you can save some money by solving it yourself! Check out Floodbrothersplumbing.


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>